Bluetooth Pairing Instructions:

CIG Bluetooth (The system can pair up to 3 phones)
Pairing your phone is simple, just follow these steps:
 

  1. Hold button down until you hear 3 short beeps. (This puts the system into pairing mode for 5 minutes.
  2. Go to settings or connection in your phone menu.
  3. Find Bluetooth menu.
  4. Turn Bluetooth on.  (Your phone will have a function like: Search for new device → New → Handsfree Search.  Depending on the phone, the selection will vary, select the function and the phone will search for the Bluetooth kit.)
  5. Your phone will display all the Bluetooth devices in the area.  Select CIG-Blue.  Enter the passcode 1234 and the system will let out a positive beep to advise you are now paired.
  6. To delete all paired phones: hold button for 15 seconds.
  7. Important note for NOKIA users:  If you want the kit to connect automatically you must now select Paired Devices and select the CIG-Blue and change default to: Device Authorized → Yes or Conn Auth → Yes or Auto-Conn, Without Confirmation → Yes.  This allows your phone to automatically connect when you start the car.

Parrot Eclipse BT-E500/600
Pairing your phone with the BT-E500/600:

  1. Enable the Bluetooth mode on your mobile phone.
  2. Search for peripherals.
  3. Connect to Parrot EVOL.  Enter the code link 1234 and then confirm.  Once BT 500/600 connects to your phone and it will say “Pairing Successful.”

 

Entertainment System:

How can I listen to the entertainment system on my radio?
Look for a round black switch and turn it on.  Tune your radio to 88.1, 88.9, or 89.1.

How come my TV tuner is not clear?
Moving vehicles will decrease the TV reception.  Amplified antennae are available as a add-on.

 

Sunroof/Moonroof:

How do I program the sunroof?
Program the sunroof by:
    1. Place the panel in the desired preset position
    2. Push button (1) and hold the button for about 3 seconds until you hear a beep.
    3. Place the panel in the second desired preset position.
    4. Push button (2) and hold the button for about 3 seconds until you hear a beep.

Why does my sunroof open/close continuously when I remove the key?
The jamming protection becomes active there is an obstacle.  The sunroof will continuously try to close until the obstacle is removed.  Also, check to see if your wind deflector is too tight by pressing it down. 

 

Navigation:

How come the phone number I have entered is not available?
Phone numbers change so you must update your DVD-ROM with the manufacturer.

 

Leather:

How do I clean my leather seats?
To clean your leather seats, use a small amount of mild soap with a clean soft cloth.  Wipe the seats with the cloth and thoroughly wipe the solution off with a clean damp cloth.

Can I place a seat cover over my leather seats?
If your vehicle has side air bags, you should not place any covers over your seats because the air bag cannot deploy in emergency.

 

Wheels:

Where are the tools to unlock my wheels?
Please check your glove box or wheel kit for proper tools to remove the cover or wheels.

 

Wood dashes:

What can I use to clean my wood dash?
Use mild soap and a clean cloth to wipe the wood dash.  Do not use Armor All to clean your wood dash because Armor All will break the clear coat from the wood grain.   

 

If you can not find the support you need on this page, contact us:

Via mail:

        DTP Auto, Inc.
        Technical Support Department
        5006 Encinita Ave # B
        Temple City, CA 91780

Via phone:

        Office: 626-287-4004

        Duy: 626-786-9658
                818-468-2509

Via FAX:

        626-287-4002

Via e-mail:

        michael@dtpautoinc.com

        duy@dtpautoinc.com